Argentina
Canada EN
Chile
Colombia
México
Perú
United States
België
Česká republika
Danmark
Deutschland
España
France
Italia
Magyarország
Nederland
Polska
Portugal
Slovenská republika
Schweiz
Suomi
United Kingdom
简体
대한민국
Singapore
Global
International
EN-AU
EN-AU
EN-AU
Synthetic Belts are produced using different materials, thicknesses, colours etc. Therefore each belt has different features such as high grip, non-fray or wear-resistance for example.
Food Grade belts are primarily used in the Food Industry and the Tobacco Industry. Flame-retardant and energy efficient belts are a sought-after feature in the Airports and Logistics Industries.
For the Food Industry, we manufacture belts for use in high or low temperatures, with excellent resistance to oils and fats and superb release characteristics.
To ensure food safety and to avoid any food contamination, a complete range of belts is available in compliance with:
Ammeraal Beltech developed belts with antimicrobial additives to assist in reducing the number of microbes on food contact surfaces. This also reduces the risk of food contamination - ensuring optimum adherence to your food safety standards and supports the implementation of your ISO 22000 requirements (previously HACCP).
Our AntiMicrobial (AM) belting range will help to keep the belt cleaner and reduce build-up of bacteria on the belt surface.
Stronger and tougher than ever.
Our non-fray belts run and remain intact longer and deliver even better food hygiene by reducing fabric fray contamination.
Our KleenEdge and AmSeal Belts tackle contamination risks that may occur from belt edge wear. The belt construction is designed in such a way that the high strength reinforcement fabric is held securely together in a tough non-cracking thermoplastic polyurethane seal.
Particularly when conveying small goods, the transfer between 2 belts must be as short as possible. In this case it is common to use knife-edges.
Knife-edges are used in material handling, primarily on conveyor belts for the Food Industry and for the Beverage Industry. More tension is needed to flex the belt over a knife-edge which causes more wear. This calls for premium quality belts.
We offer low noise belts for better working environments capable of high-speed power turns and extremely reliable flame-retardant* belts with extra long-wearing top covers.
Our high impact-resistant belts are able to withstand heavy shock loads.
*ISO340
Working closely with OEMs we have developed a range of self-tracking belts showing superior performance on fixed centre conveyors, two-way running conveyors and wide, short centre belts. Tracking of a belt in these situations is always very difficult.
Our high grip belts are specifically designed to increase the friction between the belt and the products being carried. This is often needed for inclined transport or in slippery conditions.
High grip characteristics can be obtained by using different materials and/or using certain profiles (embossing).
To give you an impression of the practically unlimited possibilities, a selection of popular profiles are shown here.
We offer a range of wear-resistant belts that are specifically designed to handle even the toughest conditions you can think of.
Wear-resistance is one of the most important properties that determine the life expectancy of a conveyor belt.
To ensure that belts run as efficiently as possible on conveyor systems, we present a series of belts that offer the potential of a considerable power consumption reduction.
Belt selection is a very important factor in saving energy, but not the only one.
Ammeraal Beltech’s ‘Energy Saving Concept’ is based on 3 pillars that influence the power demands of a conveyor:
Featured Products are only a sub-set of our extensive product line-up, the widest in the business. Our experts can help you find the right belt. Fill-in the contact form or go to our Contact page.
| Article Code | Description | Belt thickness | Hardness top side | Info | |
|---|---|---|---|---|---|
| internal AB method KV.002 | according to ISO 868 | Minimum pulley diameter | |||
| total | top side | flexing | |||
| SBFL574601 | Flexam EX 10/2 0+05 black M2 AS FR | 2.5 mm | 80A Shore | 60 mm |
|
| SBFE578850 | Felt EX 10/2 0+FE black AS | 3.3 mm | 50 mm |
|
|
| SBFL513284 | Flexam EX 15/3 0+10 black M2 AS FR | 3.9 mm | 80A Shore | 100 mm |
|
| SBFL572652 | Flexam EX 10/2 0+A42 black AS FR | 4.7 mm | 55A Shore | 40 mm |
|
| SBFL573230 | Flexam EX 10/2 0+10 black AS FR | 3 mm | 80A Shore | 60 mm |
|
| SBFL574122 | Flexam EX 10/2 0+A32 black AS | 2.6 mm | 35A Shore | 25 mm |
|
| SBFL574123 | Flexam EX 10/2 0+A47 black AS | 2.5 mm | 35A Shore | 25 mm |
|
| SBFL574552 | Flexam EX 10/2 0+A42 black AS | 4.5 mm | 35A Shore | 40 mm |
|
| SBFL574711 | Flexam EX 10/2 0+07 black M2 AS FR | 2.5 mm | 95A Shore | 80 mm |
|
| SBFL575252 | Flexam EX 8/2 0+A20 black AS FR | 7.8 mm | 55A Shore | 60 mm |
|
| SBFL576601 | Flexam EX 10/2 0+05 black M2 AS FR IR | 3.5 mm | 80A Shore | 60 mm |
|
| SBFL577702 | Flexam EX 10/2 0+A8 grey AS | 2.9 mm | 35A Shore | 50 mm |
|
| SBFL578491 | Flexam EX 10/2 0+05 black M2 AS | 2.1 mm | 80A Shore | 30 mm |
|
| SBFL578812 | Flexam EX 10/2 0+A32 black AS FR | 2.8 mm | 40A Shore | 50 mm |
|
| SBRO514065 | Ropanol EX 10/2 0+00 black AS FR | 2.5 mm | 40 mm |
|
|
| SBRO572910 | Ropanol EX 10/2 0+00 black AS | 1.6 mm | 40 mm |
|
|
| SBRO573880 | Ropanol EX 12/3 0+00 black AS | 2.6 mm | 60 mm |
|
|
*Consult your local Ammeraal Beltech expert to determine the most appropriate belt type, colour and material combination for your specific requirements and local stock availability.
